Our standard finish is "as machined" finish. It has a surface roughness of 3.2 μm (126 μin). All sharp edges are removed and parts are deburred. Tool marks are visible.

Media blasting uses a pressurized jet of abrasive media to apply a matte, uniform finish to the surface of parts.

Anodizing is an electrolytic passivation process that grows the natural oxide layer on aluminum parts for protection from wear and corrosion, as well as for cosmetic effects

Nickel plating is a process used to electroplate a thin layer of nickel onto a metal part. This plating can be used for corrosion and wear resistance, as well as for decorative purposes

Parts are manually polished in multiple directions. Surface is smooth and slightly reflective.

Powder coating is a type of coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint which is delivered via an evaporating solvent, powder coating is typically applied electrostatically and then cured under heat or with ultraviolet light.

Brushing is a surface treatment process in which abrasive belts are used to draw traces on the surface of a material, usually for aesthetic purposes.

Painting involves spraying a layer of paint onto the surface of the part. Colors can be matched to a Pantone color number of the customer's choosing, while finishes range from matte to gloss to metallic

Black oxide is a conversion coating similar to Alodine that is used for steel and stainless steel. It is used mainly for appearance and for mild corrosion resistance

Chromate conversion coating, more commonly known by its brand name Alodine, is a chemical coating that passivate and protects aluminum from corrosion. It is also used as a base layer before priming and painting parts.

Part marking is a cost-effective way to add logos or custom lettering to your designs and is often used for custom part tagging during full-scale production.